-
Keil MCB2100 Evaluation Board
The Keil MCB2100 Evaluation Board introduces you to the Philips LPC2100 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2100 Evaluation Board connects to your PC using the serial port (for Flash download using the Philips LPC210x FLASH ISP Utility) or the JTAG interface (for program debug using the Keil Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). Two Serial and two CAN interfaces make this board a great starting point for your next ARM project.
-
Keil MCB2103 Evaluation Board
The Keil MCB2103 Evaluation Board introduces you to the Philips LPC2103 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2100 Evaluation Board connects to your PC using the serial port (for Flash download using the Philips LPC210x FLASH ISP Utility) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger).
-
Keil MCB2130 Evaluation Board
The Keil MCB2130 Evaluation Board introduces you to the Philips LPC2130 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2130 Evaluation Board connects to your PC using the serial port (for Flash download using the Philips LPC210x FLASH ISP Utility) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). Two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs make this board a great starting point for your next ARM project.
-
Keil MCB2140 Evaluation Board
The Keil MCB2140 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCB2140 Evaluation Board connects to your PC using the serial port (for Flash download using the Philips LPC210x FLASH ISP Utility) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). An on-chip USB interface, two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs make this board a great starting point for your next ARM project.
-
Keil MCB2360 Evaluation Board
The Keil MCB2360 Evaluation Board introduces you to the NXP LPC2368 microcontroller. It allows you to create and test working programs for this advanced architecture.
-
Keil MCB2370 Evaluation Board
The Keil MCB2370 Evaluation Board introduces you to the NXP LPC2378 microcontroller. It allows you to create and test working programs for this advanced architecture.
-
Keil MCBSTR7 Evaluation Board
The Keil MCBSTR7 Evaluation Board introduces you to the STMicroelectronics STR710 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR7 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). Serial and CAN interfaces, eight LEDs, and analog input (via potentiometer) make this board a great starting point for your next ARM project.
-
Keil MCBSTR730 Evaluation Board
The Keil MCBSTR730 Evaluation Board introduces you to the STMicroelectronics STR730 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR730 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). Serial and CAN interfaces, 7-segment LED display, and analog input (via potentiometer) make this board a great starting point for your next ARM project.
-
Keil MCBSTR750 Evaluation Board
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR750 Evaluation Board connects to your PC using the serial port (for Flash download) or the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). Two serial interfaces, a speaker, analog input (via potentiometer), one CAN interfaces, LCD, USB, and eight LEDs make this board a great starting point for your next ARM project.
-
Keil MCBSTR9 Evaluation Board
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). It provides Serial (RS-232), CAN, Ethernet, and USB interfaces as well as eight LEDs, analog input (via potentiometer), and several push buttons.
-
Keil MCB167-NET Evaluation Board
The Keil MCB167-NET Evaluation Board introduces you to the Infineon C167CR microcontroller and allows you to create and test working programs for this advanced architecture. The CAN and The CAN and TCP/IP (using the Crystal CS8900A) make this board a great starting point for your next C16x-based TCP/IP-enabled project.
-
Keil MCBXC167-BASIC Evaluation Board
The Keil MCBXC167 Evaluation Boards (MCBXC167-BASIC and MCBXC167-NET) introduce you to the Infineon XC16x microcontroller family and allow you to create and test working programs for this advanced architecture. This board connects to your PC using the serial port (for Flash download) or the OCDS interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). The CAN and TCP/IP (using the ASIX AX88796) which are available only on the MCBXC167-NET board make this board a great starting point for your next ARM-based TCP/IP-enabled project.
-
Keil MCBx51 Evaluation Board
The Keil MCBx51 Evaluation Board works with all 44-pin 8051 and 251 devices including the Intel 251Sx/Tx; Atmel T80C251G1D/G2D and 8051Rx2; Philips 8051Rx2 and 8xC664; Various Winbond devices; and Dallas 320, 420, and 520. Use this board to become familiar with the 8051 and 251 microcontroller families.
-
Keil MCB900 Evaluation Board
The Keil MCB900 Evaluation Board is a versatile, flexible prototype board for the Philips P89LPC93x microcontroller family. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using FlashMagic.
-
Keil MCB950 Evaluation Board
The Keil MCB950 Evaluation Board is a versatile, flexible prototype board for the NXP (founded by Philips) P89LPC952 microcontroller family. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using FlashMagic.
-
Keil MCBXC866 Evaluation Board
The Keil MCBXC866 Evaluation Board introduces you to the Infineon XC800 microcontroller family and allows you to create and test working programs for this 8051-based architecture. This board connects to your PC using the serial port (for Flash download) or the OCDS interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). Serial and CAN interfaces, analog input (via potentiometer), and eight LEDs (on Port 3) make this board a great starting point for your next 8051 project.
-
Keil MCBXC88x Evaluation Board
The Keil MCBXC88x Evaluation Board introduces you to the Infineon XC88x microcontroller family and allows you to create and test working programs for this 8051-based architecture. This board connects to your PC using the serial port (for Flash download) or the OCDS interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). A CAN interface, analog input (via potentiometer), and eight LEDs (on Port 3) make this board a great starting point for your next 8051 project.
|
